Hp1600series accepting requests since Mon 09:45:16 PM CST It hangs, and I have to press ctrl-C to get it to quit.ĭevice for Epson_Stylus_NX420: usb://EPSON/Stylus%20NX420ĭevice for hp1600series: hp:/usb/PSC_1600_series?serial=MY56HD30CKL0Įpson_Stylus_NX420 accepting requests since Thu 07:56:53 AM CST Under certain conditions type 'escputil -l' for details. This is free software, and you are welcome to redistribute it Can anyone tell me what to do? sudo escputil -r /dev/usb/lp0 -iĮscputil version 5.2.9, Copyright (C) 2000-2006 Robert KrawitzĮscputil comes with ABSOLUTELY NO WARRANTY for details type 'escputil -l' It wasn’t after I installed the first driver, but it must have installed with some of the later ones. I note that the following driver is suggested by OpenPrinting:Īnd of course Epson supplies proprietary drivers for the WF-3540 series as well. Yes, many printers are supported by open source drivers (eg gutenprint drivers), and perhaps your printer is supported by one of them. After choosing the printer openSuSE took over and set up the printer and had me create a CUPS account. I did not down load any drivers but installed the printer by using either YaST > Hardware > Printer, orĪll Applications > System > Configuration > Print Settings > Add > Find Network Printer. The ‘gutenprint’ package supplies an Epson CLI utility called ‘escputil’ that supports some Epson inkjet printers, including providing ink levels. I’m curious as to how the ink level info is being provided. The printer is on a local network (with static ip address) and not directly connected to my laptop. Just last week I loaded openSuSE 13.1 64 bit on to a laptop and set up an Epson wf3540 and the ink levels are detected and appear in a graphic image similar to what is shown on the printer’s display. Is there anything available in the command line? What about ttink Is that true? Is there any way to override the ink level warning and print a test page? It appears that ink levels are not supported for this printer. Here is a screen shot of the printer settings that I found from the menu inĪll Applications > System > Configuration > Print Settings. Some other posts reference pipslite for Epson, but I haven’t found this anywhere. Is the Epson Status Monitor available for Suse 13.1? I installed all of the rpm’s with zypper for the NX420, such asĮpson-inkjet-printer-escpr-1.3.1-1lsb3.2.i486.rpmĮpson-inkjet-printer-nx420-1.0.0-1lsb3.2.i486.rpm I expected to use the Epson Status Monitor to override the error and at least print a test page. The problem is that the printer needs new ink cartridges and I am unable to get it to do anything (except scan) at this point. I am even able to use the scanner with the acquire images application. I downloaded the drivers from the Epson website, and everything seems to work fine. See our Activate Scan To Cloud and Remote Print instructions to activate the Scan to Cloud and Remote Print services.I recently installed a used Epson NX420 via an USB cable to my desktop running Suse 13.1.If you're registering a new product with an existing account, click I already have an account, fill out the Add a new printer form, and then click Add.If you're creating a new account, fill out the Create An Epson Connect Account form, then click Finish.Scroll down, click the I accept the Terms and Conditions check box, and then click Next.When you see the Register a printer to Epson Connect message, click OK.Select Printer Registration, and then click Next.Note: If the window doesn't automatically appear, open a Finder window and select Application > Epson Software, and then double-click Epson Connect Printer Setup. Select your product, and then click Next. Agree to the Software License Agreement by clicking Continue, and then Agree.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |